MEAN WELL DLC-02 Now with DT8 DALI Control Enabled

13 July 2022
DT8 DALI Control

MEAN WELL has upgraded the firmware on the DLC-02  master controller and the DLC-02KN DALI ~ KNX gateway.

 

MEAN WELL DLC-02
MEAN WELL DLC-02

 

The firmware upgrade means the DLC-02 and master controller is now compatible with DALI, DALI2, DT6 & DT8 LED control gear, including CCT and RGBW devices.  

The DLC-02-KN is now compatible with DALI, DALI2 & DT8 LED control gear, including CCT and RGBW devices.   

Configuration of these device is straightforward with easy-to-understand parameters for programming, which can be set done through the free downloadable software or a built-in web browser. Otherwise, basic parameters can be set using the buttons on the device.   

The DLC-02 can control 2 x 64 DALI or DALI-2 enabled devices such as MEAN WELL’s ELG, PWM and LCM series in either DALI or DALI-2. It will also accept inputs from up to 2 x 12 DALI or DALI-2 input devices such as sensors or switches.  

The DLC-02KN is a KNX to DALI2 gateway. It shares many features with the DLC-02 and can connect to a KNX system and control DALI compatible LED Drivers, including MEAN WELL’s LCM and PWM series DALI 2 LED drivers. 

For further information please do not hesitate to contact MEAN WELL Australia